Miceand Touchpads


Power Management Setup Use this menu to specify your settings for power management. If your chassis’s LED does not light up during running, please change it to the opposite direction. Chapter 5 BIOS Setup also contains the relevant information on how to tune up your system to achieve higher performance. Setup Items The main menu includes the following main setup categories. In most computer housings, you can find 4 or more holes to place studs for fixing the mainboard.

Uploader: Mamuro
Date Added: 4 July 2012
File Size: 61.13 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 70680
Price: Free* [*Free Regsitration Required]

CPU Pin 1 and cut edge 3. If you forget the password, the only way to access the system is to clear the CMOS memory. If you would like to use this header on front-panel, please remove all jumpers from this header and install your special extra microphone and line-out cable instead.

Date of Month This item selects the alarm date.

Shuttle AV49P/N RAID Driver Driver – TechSpot

The system will automatically detect the kind of CPU that you have installed and make the appropriate adjustments to the items.

Do not remove the mainboard from its antistatic protective packaging until you are ready to install it. When enabled, separate memory banks are set of odd and even addresses, and upcoming byte of memory is accessible while refreshing the current byte. Make sure your power supply have enough power for higher speed processor installed.


Each category includes no, one or more than one setup items. The following list will help you to identify jumpers, slots, and connectors along with their assigned functions: C] Install Audio Driver [4.

System Component Characteristics These fields provide you with information about the systems current operating status. Serial ATA is raiv and will allow future enhancements to the computing platform.

Shuttle * Products * Mainboards * Socket * VIA-chipset * AV49PN * Download

If you do not press the keys in time and system does not boot, the screen will prompt an error message, and you will be given the following options: OnBoard IR Port Use this item to enable or disable the onboard infrared port, and to assign a port address.

If it is set to Min Saving, powersaving modes occur after a longer timeout. If it is set a49p User Define, you can insert your own timeouts for the power-saving modes. Connect IDE cable and FDD cable on the back panel of the internal peripheral devices to the corresponding headers on board.

These default values are quite demanding and your system might not function properly if you are using slower chips or other low-performance components.

It can be used as a source for digital sound recording. When completed, new code takes effect.

Note that there are kinds of CPU fan connectors. Normally, if your mainboard supports a hardware monitoring function, a 3-pin fan power connector can have your system detect the CPU fan’s speed. Position the studs between the chassis riad the mainboard.


Downloads for IntelĀ® RAID Controller RS2BL080

Radi Threading Function The latest Intel application defines a high-speed calculating ability to optimize your system by two CUPs supported one virtual, one physical in a multi-task environment.

The total system memory is calculated by simply adding up the memory in all DIMM banks. Advanced Setup Use this menu to set the Advanced information available on your system. When riad power button is pressed for longer than 4 seconds, the system will enter Soft-Off mode.

It is recommended that you leave this item at the default value.

Shuttle AV49P/N RAID Driver For Windows 98/ME/2000/XP Free Download

Please make sure you plug each in the right direction. Referring to the following mainboard layout helps you identify various jumpers, raidd, slots, and ports. Pin 1 on the bottom: Return the jumper cap to pins Reserved, Enabled or Disabled. But the USB cable is optional at the time of purchase.