|Date Added:||20 February 2010|
|File Size:||9.52 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Answered on Oct 28, Install the new fuse, replace the fuse cap, apply power, turn the speakers on, and test for sound. This way, the old fuse can be used to make sure it matches the new fuse purchased at the store. If you can hear a “ding” sound from all speakers when the slide bar adjuster is clicked, you are finished troubleshooting for no sound.
Example of Onboard Audio menu. auio
HP and Compaq Desktop PCs – No Sound from the Speakers (Windows Vista) | HP® Customer Support
Start Windows and check for sound. Probably the air inlet and or the air outlet also the fan itself is dirty or clogged and you need to clean it up using a canned air. Otherwise, continue with the next step. If sound is missing from presraio or one of the speakers, or if the configuration type was changed, continue with speaker setup by clicking Next.
Configuring on-board sound in the BIOS Some computers come with sound on the motherboard on-board audiosome come with a sound card, and some come with both on-board sound disabled and a sound card. Click Startright-click My Computerand select Properties. Update the audio driver using Device Manager Update the audio driver using Device Manager as follows:. Answered on Dec 12, If the fuse is still good, you have a backup fuse.
Enabling the audio device Use the following steps to see if the audio device is disabled and to enable it if needed:. For example, Pavilion pf. When done, test again for sound using audlo same steps as above with the clmpaq control slides. If a sound device is listed with a down arrowthe device is disabled. The colors shown in the Speakers Auxio window should match the connector colors on the speaker hardware.
HP and Compaq Desktop PCs – No Audio Device (Windows XP)
Restoring the audio driver can quickly reset audio settings for the sound hardware and cause Windows to reinitialize the sound configuration. Update Driver Software selection in Device Manager.
If Device Status shows that the device is working correctly, the problem is probably related to sound settings, the speakers, or the cables. A cmopaq device that is disabled the name of the sound device will vary.
If the sound connectors for the speakers and microphone are located away from the parallel, serial, or USB ports, the computer has a soundcard. This might be one of the following:. If any item listed under the Sound, video and game controllers category has a speaker icon WITH a red X, right-click that item and select Enable.